Tuesday, 1 April 2014

Tips On Repairing A Double Hung Window

A double-hung window offers the convenience of sliding the bottom sash up or the top sash down when opening the window to the outdoors. To repair double hung window sash each sash requires two balance springs to support its weight; these springs also help keep the sash open. A sash with a broken spring might be difficult to open and one side of the window sash might refuse to remain in the open position. A user can follow few steps to repair a double hung window. The user can look for the sash tilt levers at the top of the lower sash.

He can use his fingers to slide the levers toward the center of the window and tilt the top of the sash toward him until is it in a horizontal position. He shall lift up on one side of the sash to release it from the window frame. For more information please visit www.Doorwindowrepairs.com.

He can also lower the top sash until he can access the tile levers on top of the sash. He must pull the vinyl covers hiding the lower sash’s balance springs from each side of the frame. Slipping his finger beneath the opening along the bottom of the covers and carefully pulling them from the frame would be a good idea to repair double hung window spring.

He should examine the balance springs inside the frame channels. Some balance cords hook into the balance spring bases, and others have brakes that can hook into the frame channels. He can use needle-nose pliers to grab the hooks at the end of the cord and pull them from the bases. Slowly allowing the cord to retract into the spring rod in the frame is the best way to repair double hung window weights.

If his balance springs have brakes, he should note the location of the brakes in the frame channels. He should insert a flathead screwdriver into the square opening in the balance spring bases. He should look at the top of the balance springs. Depending on the manufacturer, a screw holds up the springs in the frame channel and a small rod inside the spring rests over a hook.